Find a Stockist Near You
Used in Irripod Systems to attach the Tow Rope and Ball to the end of the pipe line system. BSPT Thread.
Features & Benefits
Hansen does not recommend the use of any Hansen True Fit Fittings under any driveways, paths or foundations.
No, as the high concentration of chlorine used in the water for pools will attack the material. The fitting material is only suitable for use with domestic water. Hansen products that are used in this application will not be covered by our Hansen Warranty.
Yes. For more information on installation tips refer to installation instructions.
Yes. All pipe work must be adequately supported.
Yes, all Hansen manufactured products carry our Hansen Warranty.
For more information about the Hansen Warranty, please visit the Legal Information link in the footer.
Do not over tighten. The right way to assemble a threaded fitting is hand tight plus one to two turns – no more! For more information on installation tips refer to installation instructions.
Hansen have tested all its products for use with cold water up to a maximum temperature of 60°C (140°F). We do not recommend the use of these products with temperatures higher than 60°C (140°F) as plastic expands due to temperature increases. Hansen cannot guarantee the products will perform when used with temperatures over 60°C (140°F). Hansen products that have failed in temperatures higher than 60°C (140°F) will not be covered by our Hansen Warranty.
Use a thread sealant on all threaded connections. We recommend Loctite 5331.
